https://www.interlam.co.id/parjoo-content/media/images/product/EXAIR/Cabinet Cooler/HazlocPR_800sqVHQ.jpg Interlam product image

Hazardous Location Cabinet Cooler

For use with classified enclosure purge and pressurization systems

  • Class I Div 1, Group A, B, C and D
  • Class II Div 1, Group E, F and G
  • Class III

HazLoc Cabinet Coolers maintain NEMA 4/4X integrity and are CE compliant!

What is an EXAIR HazLoc Cabinet Cooler System?

These Cabinet Cooler Systems are engineered and approved for use upon purged electrical enclosures (not included) found within classified areas. The areas approved are Class I Div 1, Group A, B, C and D - Class II Div 1 Group E, F and G - and Class III. EXAIR's HazLoc Cabinet Cooler Systems have been tested by UL and meet the stringent UL requirements for these areas. Cabinet Cooler systems are a low cost and reliable way to cool purged electric control panles found within these environments. They utilize Vortex Tube technology to produce up to 5,600 Btu/hr, with No Moving Parts, which additionally creates a low maintenance solution for cooling your HazLoc purged cabinets.

Advantages:

  • Rated for Div I Hazardous Locations
  • UL Classified
  • Available in 8 different cooling capacities
  • No Moving Parts, low maintenance
  • Thermostat control redces operating cost
  • Large range of cooling capacities up to 5,600 Btu/hr
  • 5 year warranty
  • Low cost

Why EXAIR HazLoc Cabinet Cooler Systems?  

EXAIR’s HazLoc Cabinet Cooler Systems have been set apart from the competition by achieving the UL classified designation for Div I environments. Thermostatically controlled systems are recommended for the highest efficiency and include UL listed solenoids, also for hazardous environments. EXAIR Cabinet Cooler systems will install on your purged enclosure in minutes, require little to no maintenance and operate under the toughest of industrial conditions. If you require low cost, ease of use and/or reliability – a HazLoc Cabinet Cooler system will meet your needs.

EXAIR Hazardous Location Cabinet Cooler Systems are available in 8 different cooling capacities from 1,000 Btu/Hr. to 5,600 Btu/Hr. This range of cooling allows for choosing the best fit for your cooling needs without wasting compressed air.

Cabinet Cooler Systems protect your electronics from heat, dirt and moisture and keep your processes running. They are the low-cost solution to messy, high maintenance coolant-based air conditioners with simple installation. With modern technology comes an increased number of small electronic components packed into smaller electronic cabinets. This creates a high internal heat load which increases failures due to heat. Components will fail, sensors will misread, controls can drift and displays become inaccurate. EXAIR HazLoc Cabinet Coolers can solve these problems and prevent lost productivity, shutdown and the expense of new components.

SAFETY!!

EXAIR's HazLoc Cabinet Cooler Systems are not purged and pressurized control systems and should not be relied upon nor used in place of a purged and pressurized controller. They are meant for use in conjunction with a purged and pressurized control system.

For more information please contact us