Deep Hole Vac-u-Gun

Blow chips loose and vacuum them away in one step! Ideal for cleaning cavities and drilled holes!

---

What is The Deep Hole Vac-u-Gun?

The Deep Hole Vac-u-Gun is a low cost solution to quickly remove chips and contaminants from grooves, containers and drilled holes where blow guns could create potentially hazardous flying debris. Simply position the Deep Hole Vac-u-Gun over the hole and press the trigger. A small blow tube dislodges and lifts the chips while the large suction tube vacuums them away. The operator is protected from flying debris since all contaminants are conatined within the clear suction tube. It is perfect for cleaning holes up to 1-1/4" (32mm) diameters at a depth of 18" (457mm).

Why The Deep Hole Vac-u-Gun?

The Deep Hole Vac-u-Gun uses less compressed air than an ordinary blow gun. It injects a small amount of compressed air through directed nozzles to produce a vacuum on one end and a high output flow on the other. The amplified output flow is 12 times the air consumption rate.

Lightweight and easy to use, the Dep Hole Vac-u-Gun has a durable die cast construction with No Moving Parts to wear out. A hanger is provided for easy storage or for mounting on a tool balancer.

How The Deep Hole Vac-u-Gun Works?

Compressed air, normally 80-100 PSlG (5.5 - 6.9 BAR), flows through the inlet (1) into an annular plenum chamber (2) when the trigger is depressed. A small amount of air is injected into the blow tube (3) to provide lift for the chips or debris. The larger airflow is injected into the throat of the gun through directed nozzles (4). These jets of air create a vacuum at the intake (5) which draws material in and accelerates it through the unit. The chips, debris or other particulates can then be exhausted into a filter bag or hose attached to the Deep Hole Vac-u-Gun System.

Applications:

• Holes in fixtures
• Drilled plastics
• T-slots - groove cleaning
• Coolant evacuation from parts
• Woodworking
• Container cleaning
• Tapped holes
• Cupped surfaces
• Cavity evacuation
• Bottle cleaning
• Punch press tables

Advantages:

• Low cost
• No Moving Parts - Maintenance Free
• Durable - die cast construction
• Eliminates shock hazard - no electricity
• Meets OSHA Pressure and Chip Guard Requirements
• Safe operation - no flying chips
• Lightweight and portable
• Quiet
• Low air consumption

Here are some sample of applications:

Model 6394 Deep Hole Vac-u-Gun All Purpose System removes the chips from a drilled plastic part.

 

The Model 6194 Deep Hole Vac-u-Gun cleans the t-slots on a milling machine.

If you need more info, please Contact Us

---

---